以下从网络上找到的三种方法,可以将CISCO CALLMANAGER安装到普通PC电脑
第一种软盘欺骗法
对新版本也有效果,但要CCM得恢复盘
1. Download FDIMAGE.EXE utility (can be found in LINUX or FreeBSD utilities).
2. Insert Disk1 (Hardware Detection) into CD-ROM
3. Insert empty formatted diskette.
4. In command prompt type “FDIMAGE D:BOOTIMG.BIN A:” to copy CD boot file to floppy.
5. Open A:\AUTOEXEC.BAT in Notepad.
6. Search for “s:\tools\systype s:\tools\ssstksys.ini” line.
7. After this line add 2 lines:
set XIMAGE=7825
goto CPQ7825
8. Save AUTOEXEC.BAT.
9. Insert Disk1 and this floppy to machine you want to install CallManager and boot from the floppy.
10. Windows‘95 should start installation process.
11. Installation is straitforward. Product key for OS is "FVHD IAZA ROFJ DERJ".
13. After system copied image to disk, remove floppy and system should boot in Windows 2000.
14. 2-3 reboots required for Windows 2000 to discover your hardware. At this stage you mey require to
install additional drivers for your hardware i.e. NIC cards, Video or Multimedia controllers, etc.
15. When system is stabilized (no more "new devices found"), insert disk 2 - "OS/BIOS Upgrade". It will
install all patches required. This will cause 4-5 reboots.
16. Insert "Installation, Upgrade & Recovery" Disk 1. CallManager 4.0 installation will start
automatically. Product key for CallManager 4.0 "BTOO VQES CCJU IEBI". Installation process will ask you
to insert Disk 2, then Disk 1 again.
二
针对版本安装方法,只对老版本有效果
1. Install win2k in vmware session (NOT with sp4 or sp3 built in but either plain jane or sp1 built in.
This was critical for me) then install vmware tools.
2. Install win2k sp3 separately (also critical step to install this manually and separately.. do NOT
use a win2k cd with sp3 integrated)
3. Do reg hack below
HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems\Model
"Hardware"="MCS7835"
"Memory"="1024"
"Speed"="733"
HKEY_LOCAL_MACHINE\SOFTWARE\Spirian\System Info\OS Image
"Version"="2000.2.3"
4. Install 2000.2.5 and whatever OS upgrades there are now
5. Install ccm 3.3.3
6. Install sql sp3a
7. Install sr4a
三
要配合win-OS-Upgrade-k9.2000-2-5sr5.exe ,这个需要高权限的CCO级别才可以下载
Windows 2000 Registry hacking for CCM 3.3 installation:
1. Before you install CCM in your Windows 2000 Server you must do following:
a) You must have Windows 2000 Service Pack 3 installed
b) You must have Microsoft SQL 2000 install with Service Pack 3
c) You must have Internet Explorer 6 installed
2. Here is what you will need to add in the registry:
[HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems\Model]
"Hardware"="MCS7835"
"Memory"="1024"
"Speed"="733"
NOTE: It is okay if you systems don’t have 1024 MB of memory or CPU Speed. The systems I am running on
has 450Mhz CPU and 320MB Memory.
3. Download and run latest Windows Operating Systems upgrade file from Cisco:
I believe latest upgrade file is: win-OS-Upgrade-k9.2000-2-5sr5.exe本文出自 51CTO.COM技术博客
.
TAG: cisco callmanager 安装 PC
第一种软盘欺骗法
对新版本也有效果,但要CCM得恢复盘
1. Download FDIMAGE.EXE utility (can be found in LINUX or FreeBSD utilities).
2. Insert Disk1 (Hardware Detection) into CD-ROM
3. Insert empty formatted diskette.
4. In command prompt type “FDIMAGE D:BOOTIMG.BIN A:” to copy CD boot file to floppy.
5. Open A:\AUTOEXEC.BAT in Notepad.
6. Search for “s:\tools\systype s:\tools\ssstksys.ini” line.
7. After this line add 2 lines:
set XIMAGE=7825
goto CPQ7825
8. Save AUTOEXEC.BAT.
9. Insert Disk1 and this floppy to machine you want to install CallManager and boot from the floppy.
10. Windows‘95 should start installation process.
11. Installation is straitforward. Product key for OS is "FVHD IAZA ROFJ DERJ".
13. After system copied image to disk, remove floppy and system should boot in Windows 2000.
14. 2-3 reboots required for Windows 2000 to discover your hardware. At this stage you mey require to
install additional drivers for your hardware i.e. NIC cards, Video or Multimedia controllers, etc.
15. When system is stabilized (no more "new devices found"), insert disk 2 - "OS/BIOS Upgrade". It will
install all patches required. This will cause 4-5 reboots.
16. Insert "Installation, Upgrade & Recovery" Disk 1. CallManager 4.0 installation will start
automatically. Product key for CallManager 4.0 "BTOO VQES CCJU IEBI". Installation process will ask you
to insert Disk 2, then Disk 1 again.
二
针对版本安装方法,只对老版本有效果
1. Install win2k in vmware session (NOT with sp4 or sp3 built in but either plain jane or sp1 built in.
This was critical for me) then install vmware tools.
2. Install win2k sp3 separately (also critical step to install this manually and separately.. do NOT
use a win2k cd with sp3 integrated)
3. Do reg hack below
HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems\Model
"Hardware"="MCS7835"
"Memory"="1024"
"Speed"="733"
HKEY_LOCAL_MACHINE\SOFTWARE\Spirian\System Info\OS Image
"Version"="2000.2.3"
4. Install 2000.2.5 and whatever OS upgrades there are now
5. Install ccm 3.3.3
6. Install sql sp3a
7. Install sr4a
三
要配合win-OS-Upgrade-k9.2000-2-5sr5.exe ,这个需要高权限的CCO级别才可以下载
Windows 2000 Registry hacking for CCM 3.3 installation:
1. Before you install CCM in your Windows 2000 Server you must do following:
a) You must have Windows 2000 Service Pack 3 installed
b) You must have Microsoft SQL 2000 install with Service Pack 3
c) You must have Internet Explorer 6 installed
2. Here is what you will need to add in the registry:
[HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems\Model]
"Hardware"="MCS7835"
"Memory"="1024"
"Speed"="733"
NOTE: It is okay if you systems don’t have 1024 MB of memory or CPU Speed. The systems I am running on
has 450Mhz CPU and 320MB Memory.
3. Download and run latest Windows Operating Systems upgrade file from Cisco:
I believe latest upgrade file is: win-OS-Upgrade-k9.2000-2-5sr5.exe本文出自 51CTO.COM技术博客